Suitable for: Internal use
Recommended timbers: Lighter coloured timbers e.g. Oak, Pine, Ash, Beech, Birch, Maple, Sycamore etc.
Applications: Floors, doors, stairs, worktops, woodturning etc.
Natural Hardwax Oil contains a small amount of white pigment which allows it to be used in two different ways:
Please Note:
Hardwax Oil Ultra Natural is not intended to be used in the same method as Clear Hardwax oil and should either be overcoated with 2 coats of Hardwax Oil Ultra Clear or should be applied as 2 coats over Spruce Colour tone as outlined above. Applying more than one coat of Natural on its own will usually result in a milky/patchy finish.
Coverage
1L will cover approximately 25m² in one coat depending on the timber and method of application.
2.5L will cover approximately 50m² in one coat depending on the timber and method of application.